- Transfer & Release
- Electrical Insulation
- Flexo & Offset
- Differentiated Industrial Applications
Recycled Film r-Pet for Laser dry toner digital printers
Coveme has launched on the market its Kemafoil® KTR® ECO products for digital printing systems.
These products contain 70% recycled polyester (rPET), which comes from PET that at the end of its life cycle is depolymerized to become polyester film (rPET) again. The rPET has the same mechanical and chemical, shrinkage and transparency properties as virgin Pet. Furthermore, the KTR® ECO product range is free of formaldehyde, chromium and phthalates.
Kemafoil KTR® ECO films are suitable for different digital printers such as Laser dry toner, Indigo, Latex and Direct to Film (DTF). KTR® ECO films are suitable for hybrid transfer print where firstly the image is digitally printed on a release carrier, then a white backing is screen printed and finally a thermoadhesive applied.
- Cold peel-off
- Dimensional stability of the film
- Matt finish
- Photographic quality
- Thicknesses available: 50-100 µ
|PRODUCT||TYPE OF PRINT||FINISHING||GLOSSY
KTR r70 DPL2
|Laser||Matt||2||One side||Warm||Coating release one side with primer for laser printer|
KTR r70 DPL2H
|Laser||Matt||5,6||One side||Hot||Coating release on one side with primer for laser printer|
KTR r70 DTF 2H
|Direct to Film||Matt||-||One side||Hot/Cold||Coating release one side with primer for DTF printer|
KTR r70 DPX 2
|Latex||Matt||3||Both sides||Hot/Cold||Coating release on both sides|
|Indigo||Matt||-||Su un lato||Cold||Coating release on one side|
Notes and certifications
Other thicknesses available on request
Rolls with core diameter 3" or 6" on request (76 or 152 mm) .
Customized sheets available
Kemafoil® is a Coveme registered trademark